Expert Answers about Chevrolet Hitch Fabrication Parts
- Materials Used in Bestop Trailmax II Fold & Tumble Fabric Bench Seat B3944137
- The Bestop TrailMax II Fold & Tumble Fabric Rear Bench Seat # B3944137 uses fabric for the center panels and vinyl for the sides and back. For an all-vinyl version in spice we offer part # B3944037.
view full answer... - Are the Cords Sewn Into the Fabric on the Solera Replacement Awning Fabric
- I spoke with Lippert about the Solera Replacement Awning Fabric part # LCV000334385 and they informed me that the cords are indeed sewn into the fabric.
view full answer... - Is Curt 18-Inch Combo Bar with 2-1/2-Inch Trailer Hitch Receiver C49511 Completely Open Inside
- The Curt 18-Inch Combo Bar with 2-1/2-Inch Trailer Hitch Receiver # C49511 is a raw-finish fabrication part that is without any type of stops or obstructions inside the tube. Its interior is completely open (and unfinished) all the way through. The unfinished exterior reduces prep time for welding.
view full answer... - Can A Fifth Wheel Be Used With An Inverted Fifth Wheel On A Trailer Using A Fabricated Dual King Pin
- This is the first time I have heard of the issue you are describing. It sounds like there is an inverted fifth wheel hitch on the trailer you are trying to deal with.
The best solution I could recommend would be to remove the inverted fifth wheel on the trailer and install a king pin like part # 337KP20050.
I am not certain about the legality of the dual fifth wheel hitches being used with a fabricated dual king pin. You will need to check with the Department of Transportation in the...
view full answer... - Cord Size On Solera 18' Replacement Awning Fabric - Blue Fade
- The Solera 18' Replacement Awning Fabric - Blue Fade part # LCV000334421 uses a 1/4" poly cord per Lippert. If your existing rail will not work with this you'll want to swap it out for the Solera Awning Rail Extrusion part # LC715216.
view full answer... - Can a Trailer Hitch Mount to the Front of Ford F-350 Bed to Tie Down a Power Washer
- What you could do is use the Curt combo bar # E-9. Mounting something to the actual bed is not the best idea because the walls could be too weak or flimsy to hold or stabilize a heavy load. I wouldn't take the risk since the power washer is likely pretty heavy and if the straps failed, it could crush the truck bed where the ball mount is attached. You may need to fabricate something that is integrated into the bed supports or truck frame.
Once you secure the Curt combo bar # E-9, you...
view full answer... - Can Fifth Wheel Hitch Be Installed On 2006 Ford F-350 With Utility Bed
- Thank you for the photo of your F-350 truck. If the dump bed can be removed you will be able to install a fifth wheel hitch on your flat bed. If you are unable to remove the dump bed, a fifth wheel hitch would not be an option.
If you can remove the dump bed you may be able to install a fifth wheel hitch. It would be a custom installation that would have to be performed by a qualified professional. The hitch I recommend for this application is the Reese low profile hitch, part # RP30054.
The...
view full answer... - What Color Is On the Underside of the Solera Sand Fade Replacement Awning Fabric
- The underside of the Solera Sand Fade Replacement Awning Fabrics like the one for 17' roller assemblies part # LCV000334408 is white in color. The top side has the sand fade color. I have attached an install video for you which you can see this is in.
view full answer... - Will 18 Foot Long Solera Awning Fabric Fit Dometic Awning Arms
- While some Solera awning rollers, such as the Solera RV Awning Roller and Fabric, # LCV000211505 that you referenced, have been known to fit some Dometic arms, we cannot confirm all possible configurations will or will not fit. Mixing parts from two manufacturers has it challenges unless the component(s) has/have been intended from design stage to fit across different platforms.
My recommendation is to select a set of Solera arms to go with your new awning roller and fabric. Or purchase...
view full answer... - 5th Wheel Towing With Utility Body Truck
- I took a look at the Stahl Grand Challenger utility body, and because of the toolboxes, it wouldn't be compatible with 5th wheel or gooseneck towing. The front of the trailer wouldn't fit between the toolboxes.
I didn't see a flatbed model, but if that's what you have, Reese makes a 5th wheel hitch designed for a flatbed, part # RP30054. The hitch would install by bolting to the bed as well as a 1/2 inch thick steel plate that should be welded to brackets attached to the truck's frame....
view full answer... - What Model Hollywood Racks Bike Rack is This
- It looks like you have an older version or the predecessor of the Road Runner trailer hitch mount bike rack. They had that lower stabilizer arm at the bottoms of the racks.
view full answer... - Are There 8 Inch Hitch Extenders for 2 Inch Hitches in Stainless Steel
- There is an 8 inch hitch extender for a 2 inch trailer hitch, and is solid steel with a black powder coat finish:
- Curt Hitch Extender for 2" Hitch Receivers - 8" Long # C45791
We do not do any type of fabrication or customization; every product we sell is made by other manufacturers. I have added links to video reviews for you to check out as well.
view full answer... - Axel and Wheel Modification of the VTG201 Viking Solutions Tilt and Go 2 Cart
- The Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier for 2" Hitches, # 310-VTG002 is an import item supplied as a kit. Any modification such as replacing the axle with an extended version of, will need to be made by the purchaser as a custom fabrication.
view full answer... - Front Mounted Receiver Option for 1990 Motorhome on Ford F-53 Chassis
- Unfortunately, we don't offer a front mount receiver for the Ford F-53 chassis. Your best bet would be to use the rear hitch, if possible. If you're flat towing a vehicle, you can use a dual hitch adapter like # RM-077-6 which has a 400 lb tongue weight capacity, but be aware that the adapter is NOT designed for towing a trailer, only for flat towing a vehicle which doesn't apply any tongue load to the hitch.
If that wouldn't work for you, your best bet would be to check into having a...
view full answer... - Will Having The EcoHitch Front Trailer Hitch Receiver On a 2022 Ford F-250 Affect Engine Cooling?
- The EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7904 will not have an affect on the cooling for your 2022 Ford F-250. With the main cross bar hidden behind the factory fascia the only part which restricts air flow to the radiators and coolers is the 2" receiver portion. This does not restrict the air enough for you to see a difference in temperatures on your truck. Also if you already have a front license plate on your truck this is the same area the plate sits so there is...
view full answer... - Safety Concerns On The Demco Recon 5th Wheel Trailer Hitch
- The image you are referring to on the Demco Recon 5th Wheel Trailer Hitch - Single Jaw # DM8550043 is where the casting bolt gets bolted on and is intentionally designed that way. Demco has been in business for 57 years and have continually produced quality products through their extensive testing.
view full answer... - Can Custom Cargo Box be Mounted toYakima Swinging Enclosed Cargo Carrier
- Theoretically you could mount your own custom-made cargo box on the arm of the Yakima EXO Swing Away Enclosed Cargo Carrier - 2" Hitches - 10 cu ft - 100 lbs # Y62VR, though I do have to note that any alterations will void the carrier's warranty.
I do understand having a concern about the weight, but so long as you have the right hitch and don't overload the carrier, this won't be an issue.
Your 2005 Honda Element has a pair of Class III trailer hitches with 2" receivers that fit, the...
view full answer... - Is The Tow-Rax Battery Box # TWSP14BP Lockable
- The Tow-Rax Battery Box, part # TWSP14BP does not come with a lock available.
If you want to lock the box you would have to fabricate something, possibly using a padlock like part # RM-305. That would require drilling into the box lid and cabinet and may not be the best option.
We do offer a very nice locking battery box, part # TLA7712R. This battery box comes with the hardware needed to mount it to the trailer frame or any other place you have room and has a lockable lid included.
view full answer... - Replacement Ladder For Older Motorhome
- We do not fabricate the ladders for motorhomes. We are an online retailer and we receive the ladders from our manufacturers. I have attached a link to the ladders we offer. You may be able to find a suitable replacement for your ladder.
Some of the ladders are customizable like part # LA-401 where you can cut the bottom of the ladder legs for a better fit.
view full answer... - Are The End Caps Included With The Solera Awning Plastic Or Metal
- Good question, this unit comes with everything but the awning rail extrusion.
**Solera Awning Rail Extrusion - Black - 8' Long # LC715217.
*Replacement 13' Wide Roller w/ Fabric for Solera RV Awnings - 8' Projection - Black Fade # LCV000211459.
Replacement Endcap for Solera Power Awnings - Black - Qty 1 # LC423750.
The endcaps for the arms are heavy duty metal and do come with the unit. I will link a replacement part and a video of it so you can see.
view full answer...
Go To Results